Thingiverse
0.96 Inch Oled + EC11 encoder case
door Louisnaili_NN
1
Downloads
1
Likes
0
Makes
## 0.96 Inch Oled + EC11 encoder case
---
[1.3 Inch version also available](https://www.thingiverse.com/thing:7285232)
Here is a small housing for those SH1106 / SSD1315 / SSD1306 0.96" oled display and encoder PCBs you can find on AE for a few bucks.
I made two versions because I did not like the aesthetic of the button version as the buttons are too close together on this pcb in my opinion.
Please note that the design uses 4 M3x6 screws.
You could make custom buttons for this, please post them here if you do !
### Encoder only version
Print list :
- oled_encoder_case_back.stl
- oled_encoder_case_front_enc_0_96_in.stl
- oled_encoder_case_wheel_enc.stl
### Encoder + buttons version
Print list :
- oled_encoder_case_back.stl
- oled_encoder_case_front_enc_btn_0_96_in.stl
- oled_encoder_case_btn.stl
### Credits
I used [this model](https://grabcad.com/library/1-3-oled-ec11-1) by Oleksii Vakula for my render.
---
[1.3 Inch version also available](https://www.thingiverse.com/thing:7285232)
Here is a small housing for those SH1106 / SSD1315 / SSD1306 0.96" oled display and encoder PCBs you can find on AE for a few bucks.
I made two versions because I did not like the aesthetic of the button version as the buttons are too close together on this pcb in my opinion.
Please note that the design uses 4 M3x6 screws.
You could make custom buttons for this, please post them here if you do !
### Encoder only version
Print list :
- oled_encoder_case_back.stl
- oled_encoder_case_front_enc_0_96_in.stl
- oled_encoder_case_wheel_enc.stl
### Encoder + buttons version
Print list :
- oled_encoder_case_back.stl
- oled_encoder_case_front_enc_btn_0_96_in.stl
- oled_encoder_case_btn.stl
### Credits
I used [this model](https://grabcad.com/library/1-3-oled-ec11-1) by Oleksii Vakula for my render.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
