Thingiverse
0.96" OLED Display Case
door Greeves999
24
Downloads
11
Likes
0
Makes
A neat little box to hold the common 0.96" OLED displays that are readily available.
The box is deep enough to accomodate straight dupont connectors off the back of the OLED PCB.
The front 'clicks' into place on the back plate
This design uses the excellent design 'fragment' for holding the PCB itself that was posted here by Nan_1:-
https://www.thingiverse.com/thing:2157801
You'll need the STL file from here, if you choose to adapt my OpenSCAD code
https://youtube.com/shorts/ZrFk72BaaCQ?feature=share
The box is deep enough to accomodate straight dupont connectors off the back of the OLED PCB.
The front 'clicks' into place on the back plate
This design uses the excellent design 'fragment' for holding the PCB itself that was posted here by Nan_1:-
https://www.thingiverse.com/thing:2157801
You'll need the STL file from here, if you choose to adapt my OpenSCAD code
https://youtube.com/shorts/ZrFk72BaaCQ?feature=share
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
