Thingiverse
Models
Go to Model
0-waste a multipurpose robot
980
Downloads
918
Likes
16
Makes
0-waste: a multipurpose robot
This kind of remotely controlled robot is highly appreciated for its easy of use, low mantenaince and cost effectiveness. Although not particularly advanced, it is often preferred to more sophisticated models, especially by experienced operators.
It is mostly adopted by space scavengers to dismantle abbandoned ships.
- - - -
No support, no glue and no screws are needed.
The model has 12 point of articulation, every joint is designed to have some amount of elasticity and to be printed and put together even if the printer used is not the most precise.
There are 4 files: one for each color, the parts are oriented in a way that does not require supports.
The armor can be hold in place by some 1.75mm filament (the black dots in the photos).
The assembly of the robot is quite straightforward and if you end up with an alternative model...well, post it! :)
This kind of remotely controlled robot is highly appreciated for its easy of use, low mantenaince and cost effectiveness. Although not particularly advanced, it is often preferred to more sophisticated models, especially by experienced operators.
It is mostly adopted by space scavengers to dismantle abbandoned ships.
- - - -
No support, no glue and no screws are needed.
The model has 12 point of articulation, every joint is designed to have some amount of elasticity and to be printed and put together even if the printer used is not the most precise.
There are 4 files: one for each color, the parts are oriented in a way that does not require supports.
The armor can be hold in place by some 1.75mm filament (the black dots in the photos).
The assembly of the robot is quite straightforward and if you end up with an alternative model...well, post it! :)
70r71 also publishes on
10 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
