Thingiverse
Models
Voir le modèle
0-waste: Jubilee
315
Téléchargements
567
Likes
6
Makes
A robot that is articulated and poseable. It is designed to be fdm friendly and supportless. Does not require glue.
No support, no overhangs, no bridges, no climbing over 45°.
No glue and no screws are needed, you already have everything tou need.
My model has to be printable, assemblable an playable with a setup far from optimal.
The model has 13 point of articulation, every joint is designed to have some amount of elasticity and to be printed and put together even if the printer used is not the most precise.
There are 4 files: one for each color, the parts are oriented in a way that does not require supports.
The armor can be hold in place by some 1.75mm filament.
The assembly of the robot is quite straightforward and if you end up with an alternative model...well, post it! :)
Almost every part of this robot is interchangable with my other 0-waste models.
No support, no overhangs, no bridges, no climbing over 45°.
No glue and no screws are needed, you already have everything tou need.
My model has to be printable, assemblable an playable with a setup far from optimal.
The model has 13 point of articulation, every joint is designed to have some amount of elasticity and to be printed and put together even if the printer used is not the most precise.
There are 4 files: one for each color, the parts are oriented in a way that does not require supports.
The armor can be hold in place by some 1.75mm filament.
The assembly of the robot is quite straightforward and if you end up with an alternative model...well, post it! :)
Almost every part of this robot is interchangable with my other 0-waste models.
70r71 publie également sur
10 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
