Thingiverse
00 Bogie Body V1
door GetTrained
0
Downloads
1
Likes
0
Makes
(I wouldn't recommend printing this because I'm working on a better one now)
An 00 gauge 3d printed Bogie
holes should be 5mm (I would recommend to drill the holes after the print) so fit a 4.5mm axle which fits my wheel model (https://www.thingiverse.com/thing:7090859)
The nut at the top is 8mm wide and the diameter of the screw should be 4mm
My Youtube: https://www.youtube.com/channel/UCfy0Jeki5d5OqkHdhmIv7Zw
An 00 gauge 3d printed Bogie
holes should be 5mm (I would recommend to drill the holes after the print) so fit a 4.5mm axle which fits my wheel model (https://www.thingiverse.com/thing:7090859)
The nut at the top is 8mm wide and the diameter of the screw should be 4mm
My Youtube: https://www.youtube.com/channel/UCfy0Jeki5d5OqkHdhmIv7Zw
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!