Slicer Discord
#003_Mega Venusaur – 3D printable model from MakerOnline MakerOnline
Miniatures

#003_Mega Venusaur

12 Downloads
8 Likes
0 Makes
Go to Model
The flower on Bulbasaur's back has grown significantly larger due to the energy from Mega Evolution. The increased weight of the flower has strengthened the legs supporting it. The “trunk” bearing the massive flower is longer than before evolution. Four large leaves resembling banana leaves still grow from the base of the “trunk,” but unlike before evolution, these leaves extend toward the left front, right front, left rear, and right rear. Additionally, a new ring of four green leaves has emerged, lighter in color than the basal leaves and supported by slender, brown, coconut-trunk-like structures. Four vines hung down from the central trunk, their other ends anchored to the bases of surrounding leaves. The number of sharp points on the stamens decreased, and the petals lightened in color. The original irregular white spots on the petals were replaced by a white triangular mark pointing from a top corner toward the flower's center. Two small pink flowers with six petals bloom on its forehead and back respectively. Three dark green marks—a rhombus and two triangles—appear on its forehead. To support the larger flowers grown after its super evolution, Bulbasaur's waist and legs have also become more robust.
Category
Miniatures
Source
MakerOnline
Published
What you need to print this: Intermediate Medium confidence
Why?
supports needed
Single piece Supports required Hardware needed
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, ASA
Min. bed size
50 mm (Small)
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for #003_Mega Venusaur?
Any FDM printer should handle #003_Mega Venusaur just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does #003_Mega Venusaur need supports when printing?
Yes, #003_Mega Venusaur will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is #003_Mega Venusaur available in?
#003_Mega Venusaur is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.
Is #003_Mega Venusaur free to download?
Yes, #003_Mega Venusaur is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection