007 hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 149.23x200.36mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.6mmFilaments Used: PLA smartfill negro PLA smartfill blanco frio PLA smartfill rojo This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Charcoal At layer #9 (0.8mm) swap to blanco frio At layer #16 (1.36mm) swap to rojo At