Hobby
Go to Model
1/18th scale teeter totter
352
Downloads
447
Likes
2
Makes
This is my take on a crawler teeter totter, using no nuts or bolts, just a bit of CA glue (superglue) or other glue you have that connects printed parts together. All you need to do is print 5 parts, and glue 2 of them together any you're ready to roll. Everything fits on a standard Ender 3 plate which is 220x220mm. So as long as your plate is that big or bigger you can make this. All prints are printed flat and no supports are required. Packing this up for storage or to bring it places is easy as the whole thing breaks down and lies flat.
Files included:
TT Side Triangle: Comes in 2 versions. V1 (brown triangle in pictures) is taller and gives a pretty steep climb angle, but it is still doable with my TRX4M and SCX24. But there is some slippage and bouncing while trying to climb, a good challenge. V2 (white triangle in pictures) is a little shorter and has a more manageable approach angle, making it easier to climb. Both side triangles work with all other parts.
TT Brace B
Files included:
TT Side Triangle: Comes in 2 versions. V1 (brown triangle in pictures) is taller and gives a pretty steep climb angle, but it is still doable with my TRX4M and SCX24. But there is some slippage and bouncing while trying to climb, a good challenge. V2 (white triangle in pictures) is a little shorter and has a more manageable approach angle, making it easier to climb. Both side triangles work with all other parts.
TT Brace B
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!