Slicer Discord
1/72 Object 279 – 3D-printbaar model van MakerWorld MakerWorld
Other Miniatures

1/72 Object 279

15 Downloads
11 Likes
10 Makes
Model downloaden
History: The Object 279 was an experimental Soviet tank developed in 1959. This tank was designed to cross rough terrain and break though the enemies lines. It features a unique elliptical armor designed to protect against APDS and shaped charge ammunition. The Armor was also designed to protect the tank against a nuclear attack. The thin profile was designed to deflect a nuclear blast around the tank. Its armament consists of a 130mm rifled gun and 14.5mm coaxial machine gun. Only one of the three test units survives at a tank museum in Russia. Description:My recreation was based off of images from WarThunder and then made in the game Stormworks and the exported out of the game. There is quite a bit of support for this one but I didn't find it difficult to remove. All you should need to remove the supports is a pair of side cutters.
Categorie
Other Miniatures
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gevorderd Gemiddelde betrouwbaarheid
Waarom?
supports nodig · zeer grote print
Eendelig Supports vereist Mogelijk schalen/splitsen nodig
Supports 2/3
Montage 0/3
Instellingen 1/3
Bedgrootte 3/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Min. bedgrootte
300 mm (Zeer groot)
Software
Cura, PrusaSlicer of vergelijkbaar
Veelgestelde vragen
Welke 3D-printer is geschikt voor 1/72 Object 279?
Elke FDM-printer zou goed overweg moeten kunnen met 1/72 Object 279. Het is geprint op machines zoals Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. Een minimaal bouwvolume van 300 mm wordt aanbevolen.
Heeft 1/72 Object 279 supports nodig bij het printen?
Ja, 1/72 Object 279 heeft waarschijnlijk supports nodig vanwege overhangen en geometrie. We raden boom-supports in je slicer aan voor makkelijker verwijderen. Schakel supports in in Cura, PrusaSlicer of Bambu Studio vóór het printen.
In welk bestandsformaat is 1/72 Object 279 beschikbaar?
1/72 Object 279 is beschikbaar in het formaat STL. Deze bestanden kunnen worden geopend en geslicet met gratis software zoals Cura, PrusaSlicer, Bambu Studio of OrcaSlicer voor FDM-printen, of ChiTuBox en Lychee Slicer voor resin-printen. De download wordt aangeboden via MakerWorld.
Is 1/72 Object 279 gratis te downloaden?
Ja, 1/72 Object 279 is gratis te downloaden via MakerWorld. Controleer altijd de licentie op het oorspronkelijke platform om commercieel gebruik, remixen en naamsvermelding te begrijpen.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie