10" 2020 rack

This is a 10" rack* made from 2020 T-slot aluminium profiles.
*This rack doesn't fully comply with the 10" "standard", the screw spacing is slightly wider, some panels might not fit. Check measures before commiting.
Some parts are too big for a normal printer, laser cutting or manually cutting a sheet material could be an option but i don't have any templates yet.
1U panels fit on my prusa if i put them diagonally on the bed.

Non-printables needed:
4x 500 mm 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole (see 2020_profile_prep.pdf for details).
4x 300 mm 2020
4x 263 mm 2020
36x Screw M5 x 6 mm (side panel)
6x Screw M5 x 8 mm (edge bottom)
8x Screw M5 x 16 mm (feet)
16x Screw M6 x 12 mm ISO/DIN 7380 (frame)
38x Hammer nut M5 (feet, edge bottom, side panel)
104x T-nut M5 10mm long (printed ones can be used on Y-profiles, so a 100-pack is enough)

Printed parts needed:
52x T-filler-spacer
46x T-filler-gap (tip: print in contrasting color)
4x T-filler-Y
4x