Thingiverse
10" Oscar Statue
220
Download
200
Likes
0
Makes
I can't remember whose scan of an Oscar Statue was my original source. It was crap anyway. Impossible to print because of a thousand flaws.
I fixed all of the flaws and scaled it to 10" overall height and split it into front and back halves.
This produces a much nicer finish and prevents those common failures on tall printouts.
It has 5 5mm alignment holes where You can put cut-off screws before gluing the halves together. The holes have triangular tops so no overhang printing gunk will get in there.
I've added a conical void in the base, which can be filled with metal junk mixed with glue for weight. I've got old bins of nuts and bolts which I could use.
Being conical, nothing requires supports.
I use a single line of Skirt to prime the nozzle. No rafts or brim is required because of full build plate contact.
Glue it with crazy glue.
I fixed all of the flaws and scaled it to 10" overall height and split it into front and back halves.
This produces a much nicer finish and prevents those common failures on tall printouts.
It has 5 5mm alignment holes where You can put cut-off screws before gluing the halves together. The holes have triangular tops so no overhang printing gunk will get in there.
I've added a conical void in the base, which can be filled with metal junk mixed with glue for weight. I've got old bins of nuts and bolts which I could use.
Being conical, nothing requires supports.
I use a single line of Skirt to prime the nozzle. No rafts or brim is required because of full build plate contact.
Glue it with crazy glue.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
