Thingiverse
100HEX Working Gear Kit
von stevemedwin
260
Downloads
188
Likes
0
Makes
Here's a 100Hex based gear kit and the gears work! Thanks to McMaster-Carr for posting 3D files of their mechanical parts, I was able to use real gear geometry in Fusion 360. The base plate has 28 threaded holes located so that the different gears will mate in a number of different combinations. Check out the photos and the gear plan for all the possible combinations.
- I've included a tool to make assembly easier
- Make sure you print enough gears and bolts to try all the combinations
- The longer bolt is used with the hands.
- Don't tighten the bolts too much or the gears won't turn
- Be gentle when first trying to turn the gears and don't force them
If you feel really ambitious, print three sets of everything and then mount them on the stand using three bolts from the back. It's possible to connect all the gears across the three base plates.
Please post a photo if you print this in different colors or work out a different gear combination.
Update #1: Here's a short v
- I've included a tool to make assembly easier
- Make sure you print enough gears and bolts to try all the combinations
- The longer bolt is used with the hands.
- Don't tighten the bolts too much or the gears won't turn
- Be gentle when first trying to turn the gears and don't force them
If you feel really ambitious, print three sets of everything and then mount them on the stand using three bolts from the back. It's possible to connect all the gears across the three base plates.
Please post a photo if you print this in different colors or work out a different gear combination.
Update #1: Here's a short v
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!