100mm VESA |10mm LED Backlight Diffuser

Note: You need to print this model 2 times to complete the full frame.This is a dedicated VESA 100x100mm mounting frame designed to hold 10mm LED strips. It was specifically tested on 24" monitors (ASUS models).The primary function of this bracket is to provide a stable channel for LEDs, allowing the light to spread homogeneously behind the monitor rather than creating "hot spots" by sticking them directly to the panel. It can be used with any VESA 100 setup, with or without a monitor arm.Hardware & Installation:VESA Pattern: 100x100mm.Bolts: Choose your bolts that are approximately 6mm longer than your original bolts to compensate for the bracket's thickness.Washers: Using 2 washers per bolt (one on each side) is recommended for a secure mount.