Back
Mit Google anmelden
3DSEARCH / Test Models / Layer Strength Testing Jig and Test Chips
Layer Strength Testing Jig and Test Chips
Printables
Test Models

Layer Strength Testing Jig and Test Chips

by bwschulz
10 Downloads
3 Likes
0 Makes
Download Model
temperaturetower temptower layeradhesion layertest
Simple test of layer adhesion strength via a series of “which temp is stronger" comparison trials.
Category
Test Models
Source
Printables
Published
30.10.2024
Updated
30.10.2024
Comments
0

Comments

Noch keine Kommentare – sei der Erste!

Similar Models

10 Suggestions
Layer Strength Testing Jig and Test Chips
Layer Strength Testing Jig and Test Chips
by bwschulz
Prusa Mini Temptower for PLA, PETG and ABS
Prusa Mini Temptower for PLA, PETG and ABS
by steveleader
BambuLab P1P & P1S Temperature towers
BambuLab P1P & P1S Temperature towers
by AlexM
Filament Temp Tester
Filament Temp Tester
by yahbluez
Temp Tower PLA Prusa Mini+
Temp Tower PLA Prusa Mini+
by DerDave
Temperature Tower auto g-code insertion to set temps automatically - Tune PETG for no stringing
Temperature Tower auto g-code insertion to set temps automatically - Tune PETG for no stringing
by DockGuy
Temp Tower | Temperature Test | Stringing and Bridging Probe
Temp Tower | Temperature Test | Stringing and Bridging Probe
by Extrutim
BambuLab A1 & A1-mini Temperature towers
BambuLab A1 & A1-mini Temperature towers
by AlexM
Scan Tower : Calibrate a Filament's Fan & Temperature Settings (Bambu X1/X1C/P1P or any printer)
Scan Tower : Calibrate a Filament's Fan & Temperature Settings (Bambu X1/X1C/P1P or any printer)
by Adam L
TEMP TOWER TEMPLATES
TEMP TOWER TEMPLATES
by dirtsky