Small Picture Frame Clamp

Here's a little clamp for helping with picture frame glue ups.

YouTube: https://youtu.be/i-NYl57XfNw

Suggest printing in PLA with the following settings:

0.25mm layer height
30% infill
Overhang support

Additional hardware items you will need are:

90mm of M6 threaded rod
1 off M6 nut
2 off M6 washers
2 off M3 by 20mm pan head screws

The hole in the plunger needs to be tapped M6 and the threaded rod should be screwed in with some glue, such as 5 min