Thingiverse
Catwoman Necklace
by wilson5710
38
Downloads
48
Likes
0
Makes
A quick necklace design based on the Catwoman character from DC Comics.
Measures 40mm on the X axis and 3.46mm on the Z axis.
Printed mine at .2mm layer height with an infill of 30% at 40mm/s utilizing ABS. Gave it a quick wet sand with 600 grit and then two coats of high gloss lacquer.
Measures 40mm on the X axis and 3.46mm on the Z axis.
Printed mine at .2mm layer height with an infill of 30% at 40mm/s utilizing ABS. Gave it a quick wet sand with 600 grit and then two coats of high gloss lacquer.
Sign in to leave a comment
Sign in