Scoop standoffs for ZMR quadcopter

These "standoffs" are more like side-walls than standoffs, but they replace the stock standoffs that come with the ZMR quadcopter frame. THEY ARE A DIFFERENT HEIGHT, giving 1 inch height instead of the standard standoff length. It is plenty of room for my cam which is a Fatshark 600 TVL cam, but max's it's tilt at about 17°.

Holes are meant for a 4-40 screw tap, but they'll work fine for an M3 tapping tool as well. If you want to just screw into the hole with a 4-40 or 3mm you'll probably