RF1000 E3D V6 Conversion

Parts to use a e3d-v6 3.00mm Bowden (24V) with the RF-1000 Renkforce Printer
Additionally you will need 1 M3x25 + nut to hold the e3d in place.

Step 1) Print (Rotate e3d.stl & e3d_ag2.stl by 180Degrees :) ) all parts with 70% Infill prefrably in ABS. No support needed.

Step 2) Installing the e3d into the e3d.stl: Push the e3d through the middle hole until it's nearly at the top, then press it to the left where it will snap into it's final position. Fix it in place with the M3x25 and nut.