600TVL Fatshark Camera + X525 quad + dampener plate

A simple mount for the 600TVL FPV camera.
It can be tilted by 90 deg with a common 9g servo (or whatever) if you want.

The yellow arm is glued to the camera's mount, because I wanted to print it horizontally so it is not fragile..

I also printed an anti-vibration plate for the flight controller.

An STL model of the camera itself is uploaded too.


A cable-tie is used as as rotating axis. An M3 screw could be used, but would be unnecessary weight I think..
It also double secures the