Thingiverse
Ski Pole Powder Basket
by chayesSAS
25
Downloads
23
Likes
0
Makes
100mm powder basket
Hole is 10.5mm at the top, tapered 1 degree
11/06/15 NOTE: If you printed one of the .mfp files before this note, there has been a minor change that greatly increases the stiffness of the part, and only add .1CC of Kevlar to the print
If you are printing on a Markforged Mark One, I highly recommend you download one of the included .mpf files and print from a USB. I put a lot of work into the fiber layout and you won't get that with just the .stl.
Revisions:
Rev C f
Hole is 10.5mm at the top, tapered 1 degree
11/06/15 NOTE: If you printed one of the .mfp files before this note, there has been a minor change that greatly increases the stiffness of the part, and only add .1CC of Kevlar to the print
If you are printing on a Markforged Mark One, I highly recommend you download one of the included .mpf files and print from a USB. I put a lot of work into the fiber layout and you won't get that with just the .stl.
Revisions:
Rev C f
Sign in to leave a comment
Sign in