Belt clamp rub plate 5mm spacer TILT Racing Drone

This is my simple solution for those of you that got a kit with 8 x 30mm spacers and 4 x 35mm and are printing plates not using the pro carbon. Although you may find a combo that works for the pro version.

Use the latest arm supports for 25mm spacers. You'll have 5mm of the 30mm spacers protruding from the top.
The 35mm spacers go in the middle as normal.

This 5mm plate goes between the spacers and top plate. Either way will stop the clamp catching/rubbing on the top plate. But up the rig