Printable 12 tooth T5 pulley

This is a 12 tooth T5 pulley. The pulley has also been made to use two M3 nuts and two set screws.

Note: if you are switching from the standard 8 toothed Prusa Mendel pulley you will need to reset your X and Y axes steps/unit in your firmware. You can use the handy dandy RepRapCalculator by Prusajr to find your steps/unit: https://github.com/prusajr/RepRapCalculator

Update: The stl file has been updated with smaller nut traps. We've added the native Solidworks file and a STEP file for thos