Bed corner for mounting a 3/16 Aluminum Build Plate

This is just a slightly modified bed corner piece for mounting a 12" x 12" x 3/16" Aluminum bed plate with your choice of coating (PEI, Buildtak, Bare, Etc.) to your TAZ. It should fit most if not all of the cirrent ones out there. Requires 2 3mm heat set inserts per corner, sourced from Mcmaster Carr http://www.mcmaster.com/#94180a333/=zkm85f and the stock corner hardware and bed retention fingers. The Aluminum bed spreads heat much more evenly across its surface. Please note that the edges of