TinyBoy Pi hangers - updated to include B+, pi2 and pi3

This is just a simple pair of brackets I've made to hold a raspberry pi onto the side of the TinyBoy printer (Mini-fabricator).
Countersunk on the printer side for countersink M2.5 bolts.
Best printed lying on the side as in the picture to prevent weakness at the top corners.

Updated (01-Nov-2015) to include a 7mm hole for an "off" switch and a 3mm hole for a power LED.

Updated (14-Apr-2016) to include hangers for Pi B+, Pi2 and Pi3. Files required as follows:
Pi rev 2 without switch an