Laser cut cassette rack

Laser cut cassette rack! Holds 16 of your favorite tapes!

Cut from 1/4" birch plywood.

Instructions:

1) Find a laser cutter at your nearest hackerspace, makerspace or fab lab.

2) Cut 1 set of sides, 1 set of top and bottom, and 3 sets of slats from 1/4" birch plywood.

3) Assemble and glue.

4) Let dry.

5) (Optional) If it's not hung on a wall, cut some more plywood, backing board or cardboard to attach to the back. This keeps your cassettes from sliding out.