MyMiniFactory
3D Print of Cute Swinging Deer
by Unknown
0
Downloads
0
Likes
0
Makes
This model is so cute!
Printed with my AMS using PLA:
Bambu matte white,
MechSolutions matte brown,
Polymaker silk champagne gold (2023 Christmas pack).
The eyes and nose were painted on with Sharpie acrylic brush tip markers.
Everything printed wonderfully, except that I felt that the swing model seemed a bit large. It didn’t seem as big in the makers pictures. So I scaled it down as follows:
Z @90% (to 26.79mm),
Y @ 90% (to 66.34mm),
X @ 80.94% (to 95mm).
I took a p
Printed with my AMS using PLA:
Bambu matte white,
MechSolutions matte brown,
Polymaker silk champagne gold (2023 Christmas pack).
The eyes and nose were painted on with Sharpie acrylic brush tip markers.
Everything printed wonderfully, except that I felt that the swing model seemed a bit large. It didn’t seem as big in the makers pictures. So I scaled it down as follows:
Z @90% (to 26.79mm),
Y @ 90% (to 66.34mm),
X @ 80.94% (to 95mm).
I took a p
Sign in to leave a comment
Sign in