Tiny Box

I decided to make a tiny little box to test out a low layer height setting.


Printed on ToM MK6+, 230c temp otherwise default HBP MK6+ profile.
Print-O-Matic settings:
Infill: 30%
Layer Height: .2
Shells: 0
Feedrate: 40 on unrafted one, 60 on rafted.
Filament: 2.94mm (checked with calipers)
Nozzle: .4
Drive Gear: 10.58

Not sure why the walls are roughly 9mm square, the whole thing should be 10 like the bottom. I plan to try some more settings to see how it changes. Otherwise