GIC Prusa i3 X-axis belt tensioner

This is a super easy X-axis tensioner for the GIC Prusa, your typical Amazon and eBay machine. It is a little different size than the tensioner for typical Prusa machines, which won't fit on these machines. It will diminish your x range slightly but only about 10-15mm.

The y-axis doesn't need an add-on part. Just loosen the bolts that hold it in by about 5 mm, then hand tighten the belt as you did before, then tighten the bolts until the belt is taught.

Print 100% fill, should be pretty