Thingiverse
PCB camera lens mount
by KeriL
8
Downloads
6
Likes
0
Makes
Layer 0.1mm, Nozzle 0.3, 25% infill, PLA
I had a heavy-metal camera in the drone. I removed the panel and I printed a lens holder added to make it easier.
The thread of 12mm diameter and 0.5mm metric pitch. As should fit very accurately, 0.1mm increments uploaded increasing the number of threads in diameter.
Plus 0.4mm fits me the best, but it depends on the printer.
Should you use thread-locking adhesive after adjusting the focus.
Two metric screw M2 * 8 to be putting together.
Necessar
I had a heavy-metal camera in the drone. I removed the panel and I printed a lens holder added to make it easier.
The thread of 12mm diameter and 0.5mm metric pitch. As should fit very accurately, 0.1mm increments uploaded increasing the number of threads in diameter.
Plus 0.4mm fits me the best, but it depends on the printer.
Should you use thread-locking adhesive after adjusting the focus.
Two metric screw M2 * 8 to be putting together.
Necessar
Sign in to leave a comment
Sign in