Thingiverse
Extreme bridge test
by slimc
63
Downloads
36
Likes
1
Makes
This test lets you see the maximum usable bridge for your 3D printer.
The model tests bridges from 5mm to 90mm with 5mm gaps.
The model is made to use 0.2 mm layerheight, but 0.1 can be used if you want. 0.3 is not recommended.
The model tests bridges from 5mm to 90mm with 5mm gaps.
The model is made to use 0.2 mm layerheight, but 0.1 can be used if you want. 0.3 is not recommended.
Sign in to leave a comment
Sign in