40W laser table support

Support for my K40 40 watt laser cutter table. Uses 1/4" hex expanded aluminum as a new stage.

Print three of each part. Uses the following hardware
- 3x 3 inch 1/4-20 brass screws
- 6x 1/4-20 jam nuts
- 6x 10-32 x 1.5" socket cap screws
- 6x 10-32 jam nuts
- 3x 1.75 fender washers, 1/4" hole


Laser Support keeps jack screws vertical and allows adjustment up and down. Table supports with washers keep the table flat and well supported.