cable clip for 5 or 10 cables

This is a cable clip i designed to hold 5 or 10 UTP/FTP LAN cables. The idea is that you place multiple of these to guide some LAN cables on a board to a switch.
It can hold cables from 3.5mm to 5.5mm.

Use the below print settings for good flexibility:
* layer height: **.2**mm or **.25**mm
* shell thickness: **1.2**mm
* bottom/top thickness: **0** micron
* fill density: **0**%

Use no support or platform adhesion.
I printed 24 of these on a single plate.