Calibration cube (for adehesion / temperature)

Use about 0,5G of plastic
Print time: 3 min
Need a working printer
Need infil, works fine with 20% and fast honeycomb
Size: 10x10x5mm, hollow center with 6x6x3

It works testing a adehesion test, done by the Z axis, add one in each corner of the bed
(please keep in mind that kapton tape, hairspray and all those thing wont work if your nozze is too high from the bed, with this test you can see if it is ok,

-How to use:
-----------
First of all, make sure the nozzle is ALMOST touching