Wall thickness test for Zortrax M200

Just a test to check what was going on with the M200 walls...

It has a 0.4mm nozzle, but my tests on 1.2mm walls (3 lines of 0.4mm) was just a shell... no infill.

So I made this little test with walls from 0.1 to 2mm and just realized who the Z-Suit slicer handles the thickness of the walls.

My test show me that no wall is created if its lower than 0.5mm and that the 1mm, 1.1mm and 1.2mm result in a empty shell... :/

The more you know of your printer, the best you design for it... :)