12 Button Macro Keyboard with printable Keycaps

Macro Keyboard powered by Arduino Pro Micro with printable relegendable keycaps. Buttons are a remix, I adjusted them to better fit my MX switches. Requirements: - 4x M3 x 16mm Screws (M3 x 18mm also works) - 12x MX Switches - 1x Arduino Pro Micro (5V) - 1x Micro-USB Cable Instructions: - Insert the 12 switches into the top - Solder a cable through all buttons and solder it to one of the GND pins on the Pro Micro - Solder each button to a digital pin of the Pro Micro - Flash the program onto the Pro Micro - Insert USB Cable into the bottom of the case and in the Pro Micro - Put the case together, screw in the screws, they will hold without any nuts Print Settings: - Top Case: 0.2mm, no support, 15% infill - Bottom Case: 0.2mm, no support, 15% infill - Top Keycap: 0.15mm, 0.2mm first layer, no support, 15% infill (I used Prusament PLA Vanilla White, it's nearly transparent with only 1 bottom layer) - Bottom Keycap: 0.15mm, 0.2mm first layer, no support, 15% infill Labels: - Size: 15.75m