Thingiverse
K8200/3DRAG Z axis support for trapezoidal nut fz0012 / TR8X2
by RDN_ROXAS
10
Downloads
5
Likes
0
Makes
HERE NEW STRONGER VERSION: http://www.thingiverse.com/thing:1259175
This plastic part enables you to mount a TR8X2 threaded rod on your 3drag/k8200 printer.
You can find a very cheap trapezoidal threaded rod kit on aliexpress.com typing "thsl-400-8d".
You need only self-tapping screws to lock the fz0012 nut on the printed part.
Fixed holes for M5 screws
Fixed position of the hole for fz0012 nut.
If you decide to use a TR8X2 threaded rod don't forget to set "steps per mm" to Z:400.
En
This plastic part enables you to mount a TR8X2 threaded rod on your 3drag/k8200 printer.
You can find a very cheap trapezoidal threaded rod kit on aliexpress.com typing "thsl-400-8d".
You need only self-tapping screws to lock the fz0012 nut on the printed part.
Fixed holes for M5 screws
Fixed position of the hole for fz0012 nut.
If you decide to use a TR8X2 threaded rod don't forget to set "steps per mm" to Z:400.
En
Sign in to leave a comment
Sign in