Overlord Pro Effector plate

Smaller effector plate for the Dreammaker OverLord Pro & non pro. Centers the nozzle and should get a print diameter of 180 ~190 mm on the OL Pro. It uses the stock 60mm rod spacing on the sides so you don't need to replace the OEM carriages.

Use a M2.5mm tap on the holes, a 3/32 (2.5mm)drill should be enough if you just want to force the screws in. You can reuse all of the original hardware.

I calculate the delta radius should be about 110. You'll need to redo the calibration on your prin