Christmas Tree with LEDs

Its Christmas time and this is my project of a Christmas Tree with LEDs.

The "thing" has two 3d printed parts: the tree (with LED pin holes) and the base stand.
It also requires a small circuit to power the LEDs.

The circuit requires:
- 3 x S9014 NPN Transistors
- 3 x Electrolytic Capacitor 22uF 16V
- 3 x 470 Ohm Resistor
- 3 x 10K Ohm Resistor
- 17 x Red LEDs 5mm
- 1x Small 15x6 Holes Protoboard

Full details published on http://altlab.org/d/m/jpralves/newsletters/34/#Circuitos