Thingiverse
Antenna
by HenniC4
8
Downloads
6
Likes
0
Makes
John Doe's Dipole Antenna.
My Setup (I assume, if you build this you know what you are doing, anyway):
4mm Brass rod (for indoors it should be ok and is easy to solder) from hardware store. Carefully enlarge 4mm hole in Socket. Move drill inside socket a bit, until rod can be moved with some force. Unstrip Coax inner lead for some cm and fold the shield back. Wrap inner lead 2 Times around very End of rod. Heat with a gas torch, add Solder. Be careful, the heat will make the socket materia
My Setup (I assume, if you build this you know what you are doing, anyway):
4mm Brass rod (for indoors it should be ok and is easy to solder) from hardware store. Carefully enlarge 4mm hole in Socket. Move drill inside socket a bit, until rod can be moved with some force. Unstrip Coax inner lead for some cm and fold the shield back. Wrap inner lead 2 Times around very End of rod. Heat with a gas torch, add Solder. Be careful, the heat will make the socket materia
Sign in to leave a comment
Sign in