DiiiCooler FolgerTech i3 Adapter Bracket

This quick and dirty bracket allows you to use the excellent Diiicooler on your stock FolgerTech 2020 i3 extruder (or anything else with the same heat break)

The fit isn't absolutely perfect but it works fine. There are a couple mm of clearance on all sides of the hot end.

There is a 3mm angle where the bracket meets the DiiiCooler to counteract the heating cartridge/thermistor wires pushing the cooler down. Holes are oversized 1mm so you can make small adjustments before tightening all th