Printed hydrogen Oxygen Seperator

Thinking about Creation of a H/O separator for a long time here is one of my Refined Prototypes still needs Bench testing though.
Here is the Separator and front and back panels with Hose attachment points. Later Units will have barbed and reinforced Hose connections designed for six plates at 12.75- 31.9VDC 1.2AMP it should produce 1lpm for a 49cc engine, that is plenty of Gas.
Recommended setting the Perimeters to 4 and the fill to at lease 30 to 50%
Warning use Kept-on tape if you use PETG