G Lampstand

A simple mount for defect and old bulbs. Could be filled with water and flowers or other stuff.

You also will need 2x M3 nuts and screws (I used 2 screws from an old cd drive). The hole for the screws is a little bit smaller. You can heat the nuts with a soldering iron (or hot-melt gun). I used an 3D Pen. Then den PLA or ABS will melt and the nuts are tight.

There are 2 versions:
- one for bulbs with E27 bulb socket
- the other (mini) for E14 bulb socket

Idea inspired by: http://9gag