New K8200/3DRAG Z axis support for trapezoidal nut fz0012 / TR8X2

This plastic part enables you to mount a TR8X2 threaded rod on your 3drag/k8200 printer.
You can find a very cheap trapezoidal threaded rod kit on aliexpress.com typing "thsl-400-8d".
There are 2 versions:
V1: You need only self-tapping screws to lock the fz0012 nut on the printed part.
V2: You need only M3 screws and nuts to lock the fz0012 nut on the printed part.
If you decide to use a TR8X2 threaded rod don't forget to set "steps per mm" to Z:400.
Fixed nut hole !
Enjoy ;)

HERE NE