3D Printed Watch Mainspring for Smaller Print Beds (UNTESTED)

This is a redesigned mainspring for @TheGoofy's 3D-Printed Watch with Tourbillion.

My Rep2X only has 150mm on the Y-axis, so I needed to redesign the mainspring to fit in the print area.

I did my best to keep the length of the coil the same. @TheGoofy's spring was ~2117mm long as best I can tell. v1 one is ~2096mm. v1.1 is ~2119mm.

I have not printed or tested it. I am waiting for the shafts and screws to arrive before I start building one of my own. This could be completely wron