DJI Inspire 1 Battery Heater

READ THIS VERY CAREFULLY BEFORE PRINTING!!!

For safety reasons, it is critical to use the following printer settings (for PLA):

Temperature: 210°C
Layer: 0.1mm
Use high quality cyanacrylate to glue the parts of STL-files 1 and 2.

STL-File 1: Fill 50% min., speed 35 mm/s max.
STL-File 2: Fill 50% min., speed 35 mm/s max. For the square cavity, support is very recommended.
STL-File 3: Fill 100%, speed 35 mm/s max.

These settings are necessary to ensure the high quality of the final