CTC 3d Led Halterung

This is an LED-Holder for a 1w LED. You will also need a 1kOhm resistor. The resistor should be a 1/2 w resistor, because the 1/4 w resistor gets very warm, when you use the internal 24 V power-supply. The LED is from ebay. The holder should be printed with support.



The ebay Link:
http://www.ebay.de/itm/10x-1W-Watt-High-Power-Hochleistungs-LED-Chip-Lampe-Licht-Leuchte-Birne-Warmweis-/301632630131?hash=item463ab4ad73:g:QGIAAOxyrrpTfxqg