Thingiverse
Signum CXY150R2 Printer
by RomanST
332
Downloads
239
Likes
1
Makes
Build volume: 150x150x145 mm
Print/travel speed: >150 mm/s
Approximate building cost: up to $250 (acrylic case, 6 mm plywood also okay).
Most likely you will not find a heater with apropriate size (182x202 mm), I use aluminium alloy plate with 12v 100watt silicone heater pad (180x180 mm) glued to the bollom of the plate.
Marlin 1.0.2 firware configured for this printer: https://github.com/robotsrulz/Marlin
I didn't work on full BOM and assembly instructions, it's mostly the same as
Print/travel speed: >150 mm/s
Approximate building cost: up to $250 (acrylic case, 6 mm plywood also okay).
Most likely you will not find a heater with apropriate size (182x202 mm), I use aluminium alloy plate with 12v 100watt silicone heater pad (180x180 mm) glued to the bollom of the plate.
Marlin 1.0.2 firware configured for this printer: https://github.com/robotsrulz/Marlin
I didn't work on full BOM and assembly instructions, it's mostly the same as
Sign in to leave a comment
Sign in