Leapfrog HS Dust-Cover

I designed a dust-cover for the Leapfrog HS, to keep the heat inside the printer and preventing ABS or other filament from warping. It also saves power-energie.

You can also move the cover back en forward to scroll the filament through the extruder (see picture).

I build the cover with 6mm MDF. ( ~5 euro)
The plexiglas is 4 mm thick ( ~20 euro)
I painted it with water solvent paint (~20 euro)
You also need screws to connect all the print parts (~5 euro)

You need to print the followin