Thingiverse
JG Aurora A3 Prusa I3 Filiment Spool Mount/Stand/Holder
by DaHai8
8
Downloads
10
Likes
0
Makes
This is a simple filament spool mount for the JG Aurora A3 Prusa I3 Printer from China.
The newer models of these printers have a 12x14mm hole in the back of its left side - apparently to run a USB cable through. But since the printer accepts SD Cards, I don't use USB.
So instead I created this Filament Spool Mount to fit that hole.
It's designed to use a standard 8mm bolt and nuts.
Run the bolt through the hole in the mount and place a nut in the slot underneath. Then place another n
The newer models of these printers have a 12x14mm hole in the back of its left side - apparently to run a USB cable through. But since the printer accepts SD Cards, I don't use USB.
So instead I created this Filament Spool Mount to fit that hole.
It's designed to use a standard 8mm bolt and nuts.
Run the bolt through the hole in the mount and place a nut in the slot underneath. Then place another n
Sign in to leave a comment
Sign in