Thingiverse
Nema 17 Stepper Motor Mount
by alanbithell
1
Downloads
2
Likes
0
Makes
Motor mount for Nema 17 stepper, 42mm sq.
For use in bowden conversion, designed with filament feeder hole.
Clips for underside are 7.8mm for the acrylic pursa. You can design your own to fit into the locator taps which are 5x10x2.5mm.
Motor slots in and can be held in place firmly with a zip tie if necessary.
V2
---
After finally building the thing, I realised the filament feed loop was way to close to the motor and the filament wasn't flowing smoothly. So I've made a modification t
For use in bowden conversion, designed with filament feeder hole.
Clips for underside are 7.8mm for the acrylic pursa. You can design your own to fit into the locator taps which are 5x10x2.5mm.
Motor slots in and can be held in place firmly with a zip tie if necessary.
V2
---
After finally building the thing, I realised the filament feed loop was way to close to the motor and the filament wasn't flowing smoothly. So I've made a modification t
Sign in to leave a comment
Sign in